Restored 1940s Bluetooth Bakelite Motiograph Drive-In Movie Speaker Set With Silver Pole and Base

Detroit DieCast is back in the business restoring vintage Drive-In Speakers and accessories. The Motiograph oval top is a reproduction made of fiberglass. Painted in Brown Hammertone paint. The base is original and has been completely restored. The ears of the junction box are original and have been reconditioned. Custom downlight installed in the bottom of the junction box base.

After extensive testing with various amps, we finally found the ideal amp that fits our junction box nicely. The amplifier delivers stereo sound, rated at 8 watts per channel, and is over surge protected. Our amplified stereo speaker combination produces a good mix of high/low, and mid-range sound. Included is a built-in on/off power switch that operates the amplifier and LED light. The LED light bulb illuminates the green lens and bottom of the speaker pole. We’re also supplying a 3-foot 5.5MM extension power supply cable that attaches to the amp and down the pole to power supply. This amplifier requires 12 volts to power up. A 3-foot 110 volt power supply is included to convert 110 household power into 12 volts for the amplifier. Keep in mind, our set-up could operate on any 12 volt applications, such as your car cigarette lighter. Perfect addition for your classic car shows, recreational room, around the pool, or even man cave.

Amplifier specifications.

Bluetooth 4.0 Amplifier specifications.

• Voltage: DC 12 Volt
• Dimensions: 4.8cm x 8cm
• Channel Type: Dual Channel
• Output Impedance :4Ω • Output Power: 8W +8W (4Ω speaker)

Speakers/Junction box/Pole and Base Details:

• (2) Motiograph speakers with Junction box.
• The casting are made of Bakelite.
• The internal components are all new.
• This includes 4 inch, 4 ohm waterproof speakers, volume controls, new Detroit Diecast 6-foot straight cords.
• Silver Powder Coated Drive-In Movie Speaker Metal Pole And Base
• Our heavy duty round base were designed to support our unique 2 inch metal pole for Drive-In Speakers.
• Total weight of the base is just under 8 pounds. Professionally painted silver powder coat.
• Total length of 11 inches. 2-1/2 inches high from top to bottom. Easy to assemble, top plate is made of metal, seated on a weighted plastic coated base.
• Includes Silver Powder Coated Detroit Diecast Drive-In Movie Speaker 2 Inch Outer Diameter Metal/Steel Junction Box Base Support Pole.
• This heavy duty Steel 3-foot pole was designed to support our unique Drive-In Speaker base holder.
• The Outer diameter (OD) of the pole is 2-inches. One end attaches to the base, the other to Drive-In Speaker Junction box.
• Retaining plate incorporated in bottom of pole to support pole to base.
• Retaining bolt and washer included.
• Access port in bottom of pole to allow power source wires up into the pole to Junction box.
• We added a black grommet to protect your power source wiring.
• Total weight of the pole is just under 5 pounds.

The speakers have been tested to ensure functionality. So get ready to Rock and Roll with your new set of vintage Drive-In Speakers.